It does not.If you really need those channels go for sr2k.
It does not.If you really need those channels go for sr2k.Does it mean Sr 90000 is not multistream?
Sent from my SM-A305F using Tapatalk
Any good suggestions...?Buy a decoder that support forever server
Nilesats 7w,Eutelsat 7A 7.3w,Eutelsat 8w, SES 5 5e,Eutelsat 7e ,Amos 4w,Abs 3w on 135cm offset motorized in Nyeri
starsat sr 20000Any good suggestions...?
Starsat 2000 extremeAny good suggestions...?
Which stb are you using now? maybe what you need is only forever not another box!!!!I really need this forever but don't know how... Please
Look for Sir GIDEN he can supplyHello ASAS iam looking for anyone who sell p...vu,b..ss receiver(wifi supported or iptv)
Thank you,il checkh'm but im in Dsm TzLook for Sir GIDEN he can supply
Nilesats 7w,Eutelsat 7A 7.3w,Eutelsat 8w, SES 5 5e,Eutelsat 7e ,Amos 4w,Abs 3w on 135cm offset motorized in Nyeri
I Salute you sir, Thanks alot for your advice. Though I have not done sds setup, forever is running smoothly with apollo5 being the king. Once this 'covid' is over the fridge birds will be hunted down one by one.Requirements:
Steps:
- SDS capable Double tuner STB running the latest Software version (e.g. SR-90000HD)
- 2 LNB inputs; 1 connected to the SDS satellite (tuner 2) & the 2nd to the satellite whose channels you want to open (tuner 1).
An example, using SR-90000HD to open hOSaNa (7W) with 14W as your SDS source satellite; assuming 7W is already properly set up.
Step 1: Set up the SDS satellite (@ 14W) and maximise the signal on this satellite – To this end, use TP 10955 H 1555. Polarisation depends on your LNB skew.Step 2: Connect LNB inputs to the rightful tuners. Connect 7W to Tuner 1 and 14W to Tuner 2 at the back of the receiver.Step 3: Boot up the receiver. When ready, press the F1 button instantly followed by 111 on the remote (F1+111). A UART Mode list of options window will pop up.Step 4: choose SDS mode from the UART Mode list. This gives another window with a list of SDS satellites.Step 5: Choose 14W as your SDS satellite from the list of satellites. Should all be set after this step!
More info:
The 2 LNBs may be mounted on two separate dishes or on the same dish if the SDS satellite and the one whose channels you want to open can allow you do a combo e.g., I envisage 14W & 7W being possible on the same dish but I have not tried them practically. SDS data is transmitted through "unknown" Ku-Band TPs.
14W is the recommended SDS satellite because it’s the most stable at the moment and the beam used covers the entire Africa.
View attachment 1360672
Hopefully this works for you.
Today the whole world is like a village. Being in Dar does not give you an excuse to not get what you want.Thank you,il checkh'm but im in Dsm Tz
You make me salivate 😢All HD channels forever 4WD full ON
I got gtmedia v7Which stb are you using now? maybe what you need is only forever not another box!!!!
Have you tried Cccam accountI got gtmedia v7
If your decoder has 12 digits serial number its fine.I got gtmedia v7
Tcam, cccam also ON and stableAll HD channels forever 4WD full ON