Quantum1
Member
- Oct 8, 2019
- 66
- 79
They are in 72.1E(IPP and Taifa) others u can get them in 46E. Mawindo mema
Sent from my SM-A115F using JamiiForums mobile app
They are in 72.1E(IPP and Taifa) others u can get them in 46E. Mawindo memaYa TZ iko wapi mankuri ? I used to get them on 74.9E but after Reginald's death they got $ and later on I couldn't get them at all...
Safi Quantum1, shukran ila I heard on 46 they're $...They are in 72.1E(IPP and Taifa) others u can get them in 46E. Mawindo mema
Sent from my SM-A115F using JamiiForums mobile app
Nop! The one that are $ are those of new antenna decoders bt others are there for free. Just 6ft dish and you are good to go with wachafu, mawingu, kumi, futuhi and singeli mjin [emoji3][emoji3][emoji3].Safi Quantum1, shukran ila I heard on 46 they're $...
i have experimented with the various lnb settings for sometime and am yet to see a notable difference---5150,5750(cBaNd),9750,10600,10750,11300,11475(KU). can someone pls explain in plain language how tweaking these settings affects sat signals?under what conditions is tweaking helpful,considering that the receivers come with preset parameters for the various sat positions?the only thing i know is that they are megahertz frequencies. Am always amused that am labelled 'expert'by the forum software and yet i know so little.
Thanks for the moral support....
It was all there... Challenges were a new satfinder satlink ws 6933.. flysat or media star ms 2727 or euro star lnb single solution .... Wrong polarities,difference in in lo freq hi freq between a*n and lotustv. .. but it was all there .... If I had done traditional approach ... Dish to tv ..adjust .... Dish to tv adjust.... Instead of satfinder at dish only... I would have gotten it..... Still learning how to use satfinder ws 6933..... Long story short I got it... Thx Ranksat
In East Africa, if i wanted to get the signal, what size of a dish should i have?
View attachment 1671473
i have experimented with the various lnb settings for sometime and am yet to see a notable difference---5150,5750(cBaNd),9750,10600,10750,11300,11475(KU). can someone pls explain in plain language how tweaking these settings affects sat signals?under what conditions is tweaking helpful,considering that the receivers come with preset parameters for the various sat positions?the only thing i know is that they are megahertz frequencies. Am always amused that am labelled 'expert'by the forum software and yet i know so little.
Plus c band lnbs Which use standard freq of 5150 or single solutions lnbs which use 5150/5750 for horizontal and vertical tps resp.Alright.
If you've ever checked your lnb branding c or ku, within the specifications, they give an "L.O" frequency or Local Oscillator frequency. A local oscillator is a module within the lnb that oscillates or vibrates (electrically) at a predetermined frequency to select a band of incoming frequencies from the satellite using resonance.
Simply put, if it vibrates at say 10 hertz or 10 cycles per second, it will resonate with or match with and therefore tune to frequncies say 12 to 16 hertz from the satellite.
The reason for this is satellites broadcast at a wide band or wide range of frequencies typically 10 to 12.5Mhz for ku and 3 to 5Mhz for C. It happens that it used to be difficult to create a single oscillator within an lnb that can tune to full range e of these frequencies. Therefore 2 or 3 or even 4 local oscillators were built in to tune to various sections of the frequency spectrum. Modern lnbs however have "universal" oscillators that can tune to atleast most of the satellite frequency spectrum especially ku frequencies.
Specific band local oscillators have their specific frequencies say 10600 khz which will tune to 10 to 11Mhz signals from the satellite another 10750 khz which will tune to 11.1 to 12.50Mhz signals from the sat (for ku). Such that if you want to watch a channel on freq 10950 H 27500, the reciever will activate one LO for the lower band of frequencies and then when you switch to a channel on 12226 H 27500, another LO will be used for the higher band of frequencies.
If you select 10600/10750 or "universal" on the lnb settings this transition from low to high band will be smooth because the receiver will switch LOs automatically using the 22khz tone signal which you should also put on or auto to signal the lnb to shift LOs. However when you select 10600 only youll have problem switching to higher band of frequencies say 12226.
It's like driving an automatic car on gear L. It will never shift to high gear even when its required.
Therefore When you're changing "lnb frequency" at the settings, its Local oscillator frequency that you're changing which will in turn select the high or low band frequencies from the satellite as required.
Playing with these LNB frequency settings hardly ever improve reception. It's always either you get something or not.
If you're not sure just select universal for the full band of freqs.
However some lnbs which am sure are not available locally operate with a single specific LO frequency branded on it and you must select that particular LO frequency at the settings for it to work. That's why you have many useless options at the lnb freq settings. The manufacturer is trying to accommodate all these wayward technical lnbs.
Nimekuelewa Quantum1 shukran. Ya utalii na tano are missing there....Nop! The one that are $ are those of new antenna decoders bt others are there for free. Just 6ft dish and you are good to go with wachafu, mawingu, kumi, futuhi and singeli mjin [emoji3][emoji3][emoji3].
Hope you understand by those codes
Sent from my SM-A115F using JamiiForums mobile app
Noted.Can you check this tp has full of signal signal but i can not scan any channel. 12604/29980Forever added more stuff at 16e. Check out
Noted.Can you check this tp has full of signal signal but i can not scan any channel. 12604/29980
Thanks. I tried 42.0 west beam with a 2.4, i only got the african beam. Am after digitu$k which forever can unscrambleSignal for which satellite and beam?
Try using satstar.net, it'll be easier.
Thanks. I tried 42.0 west beam with a 2.4, i only got the african beam. Am after digitu$k which forever can unscramble
Sorry ranksat. I was on 42.0E, the west beam was nowhere near with 2.4cm but TRT WorldHD signal was very strong @94%. As anyone tried 7C?42W is kinda far below the horizon, it certainly would help if you were at a high ground.
For Turkana, try E7C
or TurkSat 3A/ 4A
whose respective beams and dish sizes are
Hi.... What dish size are you guys using.. I'm assuming you are Kenya Central ..The signal is strong.. but forever nolonger rolls
The new stuff are on them.
11356 h 45○○○
6ft is abundantly fit. But forever is on and off on this satHi.... What dish size are you guys using.. I'm assuming you are Kenya Central ..