Second HD Installation Problem.....

Mwazange

JF-Expert Member
Joined
Nov 16, 2007
Posts
1,056
Reaction score
82
Wakulu kuna kitu hii imenikuta......Ninajaribu kuongeza HD kwenye mashine na kila nikiiboot napata error ifuatayo..."Drive 1 not found: serial ATA, SATA-1 strike F1 to continue, , F2 to rn the setup utility" Nimejaribu kila njia lakini naona inanizidi maarifa.....Msaaada tafadhali....
Aksanteni!!
 
Details kamanda! Unajaribi kuinstall harddrive ya aina gani?(SATA,IDE) unajaribu kuiinstall kwenye motherboad gani? etc.
 
Oooh sorry kamanda....najaribu kuongeza SATA kwenye dell Optiplex gx620....Kama una cha zaidi unahitaji niambie tu mkulu......
 
Drive 1 is your secondary hard drive. It is probably still enabled in BIOS.

There might be other BIOS options. For example, you may have to autodetect the Master Primary hard drive (drive 0) as wells as the Slave drive (drive 1) and it will find none. Go to your Boot Order options and make sure SATA is selected and not the IDE drives. You should be ok after that.

To boot a computer the BIOS must find a boot device. By default, this should be the hard drive that you have windows installed on. The BIOS can't seem to find any of your disks or drives; you seem to have three of them there, so the computer will not boot. When you turn it on, does the CD/DVD drive light up? Can you open the drive? If it can open, open your BIOS and try to find a "Boot Device" section to set the optical drive (your CD/DVD ROM drive) as the main boot device, then put your Windows install disc in and boot from disc. It will give you a message that says "Press any key to boot from disk." From there you can try to repair Windows just in case this is a driver issue and not a hardware failure issue.

If it's receiving power but not data you'll need to open your computer and make sure the SATA/PATA connections haven't been loosened. Since this is a Dell, you'll void your warranty on the computer by opening it. What I really think happened is your hard disks have crashed or the IDE and SATA ports have both failed on your motherboard.
 
HD ambayo ina windows OS inafanya kazi kama kawaida...ninachojaribu kufanya ni kuongeza another HD. Tatizo haionekane kwenye 'My Computer' hata kwenye 'Device manager'. Sasa sijui tatizo nini hapo....
 
Haya Fuatilia hiii Mwanzanke
How to Set BIOS to Boot from CDROM: Bonyeza Hapa http://www.hiren.info/pages/bios-boot-cdrom
All modern Computer Systems manufactured in the last years, support boot from cd feature, but it may be required to configure this feature in bios or previous owner of your computer system may have disabled this feature or may have changed the boot priority sequence )​
When you start your computer, check the boot-screen for setup key, In most newer pc it will be DELETE key, so make sure to check it.​
This AmiBios Require you to press DEL key to enter setup​
AMIBIOS(C)2006 American Megatrends, Inc.
BIOS Date: 03/02/06 20:15:54 Ver: 09.00.07

Press DEL to run Setup

Checking NVRAM..
now you will see some similar screen and choose the BOOT option and choose Boot Device Priority and choose first boot device to CDROM and second boot device to HARD DRIVE You can press F10 to save settings.​
BIOS SETUP UTILITY​
Main Advanced Power Boot Security Exit​

► Boot-Time Diagnostic Screen: [Enabled]
► QuickBoot Mode: [Enabled]
► Scan User Flash Area: [Disabled]
► Boot-Time Diagnostic Screen: [Enable]
► After Power Failure: [Last State]
► On Modem Ring: [Power On]
► On LAN: [Power On]
► Boot Device Priority

1st Boot Device [CDROM]
2nd Boot Device [Hard Drive]

► Hard Disk Drives
► Floppy Drives
► CDROM Drives


Specifies the boot sequence from the available devices
+ - Change Option
F1 General Help
F10 Save and Exit


(c)Copyright 1985-2006, American Megatrends, Inc.
On Award Bios you will see some similar screen and choose the right key to Enter setup​
Award Modular BIOS v4.51PG, An Energy Star Ally
Copyright (C) 1984-98, Award Software, Inc.

ASUS P2B-DS ACPI BIOS Revision 1012B

Pentium III 650Mhz Processor
Memory Test : 262144K OK










Press DEL to run Setup
08/05/00-i440BX-P2B-DS
Now choose Advanced Bios Features​
Phoenix - AwardBIOS CMOS Setup Utility
> Standard CMOS Features > Advanced BIOS Features
> Advanced Chipset Features
> Integrated Peripherals
> Power Management Setup
> PnP/PCI Configurations
> PC Health Status

Frequency/Voltage Control Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
Esc : Quit
F10 : Save & Exit Setup​
Virus Protection, Boot Sequence...
and set First Boot Device to CDROM and Second or third to HDD-0 and Press F10 to save it.​
Phoenix - AwardBIOS CMOS Setup Utility
Virus Warning
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up NumLock Status
Gate A20 Option
Ata 66/100 IDE Cable Msg.
Typematic Rate Setting
Security Option
OS Select For DRAM > 64MB​
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[CDROM]
[Floppy]
[HDD-0]
[Enabled]
[Disabled]
[On]
[Fast]
[Enabled]
[Disabled]
[Setup]
[Non-OS2]

Item Help


Select Your Boot
Device Priority
Esc : Quit
F10 : Save & Exit Setup​
Virus Protection, Boot Sequence...
On some Dell Systems you can enter bios by pressing F2​
F2 = Setup
F12 = Boot Menu



w w w . d e l l . c o m

Dimension 8100
BIOS Revision XP2


Now choose Boot Sequence and then arrance 1 to CD-Rom by pressing - + and press space to enable it
Press ESC and choose save settings and exit​
Dell - Dimension 8100 Intel Pentium 4 Processor: 1.30 Ghz
LEVEL 2 Cache: 256 KB Integrated
System Time ...................
System Date ...................Primary Drive 0 ...............
Primary Drive 1 ...............
Secondary Drive 0 .............
Secondary Drive 1 .............
Boot Sequence .................
* 1. IDE CD-ROM Device
* 2. Hard-Disk Drive C:

SPACE to enable/disable | +,- to move down/up
System Memory .................
AGP Aperture ..................
CPU Information ...............



Up/Down to Select | SPACE +,- to Change | ESC to Exit
On some Dell Systems you can enter bios by pressing F2​

Boot Device Menu
‗‗‗‗‗‗‗‗‗‗‗‗‗‗‗

1. Normal
2. Diskette Drive
3. Hard-Disk Drive C:
4. IDE CD-ROM Device Enter a choice: 1

Sometimes you can press F12 to temporary boot from cd on some Dell Systems
PhoenixBIOS 4.0 Release 6.0
Copyright 1985-1999 Phoenix Technologies Ltd.
All Rights Reserved
Copyright 1996-1999 Intel Corporation.
4S4EB2X0.05A.0009.P08

Micron Electronics, Inc.

Intel(R) Pentium(R) III processor 450 Mhz
640K System RAM Passed
255M Extended RAM Passed
512K Cache SRAM Passed







Press F2 to Enter Setup
Press F2 to enter bios setup​
ROM PCI/ISO BIOS (P2B-DS)
CMOS SETUP UTILITY, AWARD SOFTWARE, INC.
STANDARD CMOS SETUP BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP AND PCI SETUP
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS

SUPERVISOR PASSWORD USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING


Esc : Quit Shift(F2) : Change Color
F10 : Save & Exit Setup​
Boot Sequence, Boot Virus Protection, CPU Speed...
and set Boot Sequence to A,CDROM,C and Press Esc and then F10 to save it.​
ROM PCI/ISO BIOS (P2B-DS)
CMOS SETUP UTILITY, AWARD SOFTWARE, INC.
CPU Internal Core Speed
Boot Virus Detection
Processor Serial Number
CPU Level 1 Cache
CPU Level 2 Cache
CPU Level 2 Cache ECC Check
BIOS Update
Quick Power On Self Test
HDD Sequence SCSI/IDE First
Boot Sequence
Boot Up Floppy Seek
Floppy Disk Access Control
IDE HDD Block Mode Sectors
HDD S.M.A.R.T. capability
PS/2 Mouse Function Control
OS/2 Onboard Memory > 64M
MPS 1.4 Support​
650Mhz
Enabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
IDE
A,CDROM,C
Disabled]
R/W
HDD MAX
Disabled
Auto
Disabled
Disabled

Item Help:


Select Your Boot
Sequence
Esc : Quit
F10 : Save & Exit Setup​
Some Computer has Option to temporary boot from Cd/Hdd/Floppy/Usb Device, Just keep tapping the F8 button to get Boot Menu and Now choose your manufacture of CDRom.​




 
Naona tunapishana lugha, halafu font color pia mtihani mkuu....tatizo langu sio kuboot ili kuinstall OS, hilo sio tatizo langu. tatizo langu ni kuongeza HD na kuifanya kama storage mheshimiwa....
 
kwanza kabisa hakikisha hdd yako inayoweka ni jumper yake ipo kwenye sehemu ya slave au ikiwezekana itoe kabisa ndipo uiweke na pia uhakikishe kuwa data cable zote na power ya kwenye hdd imeikonect kama ile iliyo kama master pia hakikisha hiyo iliyo na os jumper yake ipo kwenye master.
 
Oooh sorry kamanda....najaribu kuongeza SATA kwenye dell Optiplex gx620....Kama una cha zaidi unahitaji niambie tu mkulu......


Washa compyuta
Dell Logo ikitokea bonyeza F2 kuingia setup(BIOS)
Tafuta sehemu ya Drives, kisha tafuta option ya Auto Detect(Or similar).
 

Mkuu SATA walishaondoka kwenye age ya jumpers za master na slave kitambo tu.....
 
Washa compyuta
Dell Logo ikitokea bonyeza F2 kuingia setup(BIOS)
Tafuta sehemu ya Drives, kisha tafuta option ya Auto Detect(Or similar).
OK...Ngoja nifanye hivyo then nitarudi kukuambia....au sema whats next after that....
 
Wakulu just an update...nimeweza kulitatua tatizo langu...ilibidi niivunjie shughuli na kuitengea muda. Baada ya kuzunguka huku na kule nimeweza kupata update driver moja nikaistall then imekubali...sasa naweza kuiona kwenye BIOS na inaonekana kwenye 'my computer' kwa hiyo case resolved. Ahsanteni wote kwa miushauri yenu....
 
Hongera sana ndugu,unaweza kutueleza ni njia ngani ulizotumia,na ni driver ipi uli-install.hii itatusaidia na wengine kama tukikumbana na tatizo kama hilo.
 
Nimepata maelekezo kutoka hapa. Nina imani itasaidia kwa wengine. tatizo ilikuwa ni kuongeza driver kwenye matherboard ambayo inapatana na HD niliyoiongeza.
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…